Msi K8N Diamond driver 1.2 is a BIOS and System Update driver from MSI. It runs on following
operating system: Windows 9X/ME/NT/2K/XP/2003/Vista/XP X64/2008. We recommend always using the most recent driver version available, so check for Msi K8N Diamond driver new verison
on our site as often as possible.
Do not forget to set a system restore point before installing Msi K8N Diamond driver 1.2 driver, to avoid problems that may occurs when you install a
wrong driver, or for other OS version etc. If a problem occur than you may restore you computer to previous time, before installing the driver.
Publisher review: - Update SiI3132 RAID ROM version to 7.1.05.- Update CPU Microcode for Sempron D0 2000MHz CPU.Specifications:CPU· Supports 64-bit AMD Opteron, Athlon 64 X2 Dual Core, Athlon 64 FX, Athlon 64 processor (Socket 939)· Supports up to 3500 , 3800 Athlon 64 FX 53, or higher CPUChipset· NVIDIA nForce4 SLI Chipset- HyperTransport link to the AMD Athlon 64/Athlon 64 FX CPU- HyperTransport supporting speed up to 1GHz (2000MT/s)- Supports 2 x PCI Express x16/x1 interface- Two independent SATA controllers, for four drives- Dual Fast ATA-133 IDE controllers- IEEE 802.3 NVIDIA MAC for 1000BASE-TMSI Reminds you...1. NVIDIA nForce 3/4 Series board DO NOT support Windows 98/ME.2. SLI Technology only supports 32-bit and 64-bit Windows XP.Main Memory· Supports dual channel DDR 266/333/400, using four 184-pin DDR DIMMs.· Supports a maximum memory size up to 4GB.· Supports 2.5v DDR SDRAM DIMM.Slots· Two PCI Express x16 slot (supports PCI Express Bus specification v1.0a compliant)· Two PCI Express x1 slots(by share)(support PCI Express Bus specification v1.0a compliant)· Three 32-bit v2.3 Master PCI bus slots (support 3.3v/5v PCI bus interface). On-Board IDE· An IDE controller on the NVIDIA nForce4 SLI chipset provides IDE HDD/CD-ROM with PIO, Bus Master and Ultra DMA133/100/66 operation modes.- Can connect up to 4 IDE devicesOn-Board SATA· NV RAID supports 4 SATA II ports(SATA 1 to 4). Transfer rate is up to 300MB/s.· Silicon Image's SATA RAID supports another 2 SATA II ports. Transfer rate is up to 300MB/s.NV RAID (Software)· Supports up to 4 SATA 2 ATA133 Hard drives- RAID 0 or 1, 0 1, JBOD is supported- RAID function available for ATA133 SATA HD drives or 2 SATA HDSilicon Image's SATARAID (Software)· RAID 0 or 1, JBOD groups and multiple RAID are supported· Support up to 2 SATA devices connected to a single controllerMSI Reminds You...· The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.Audio· Creative sound Blaster Live 24-bit onboard audio- 24-bit / 96KHz audio quality- 100db SNR clarity- Up to 7.1 CH Surround Sound, Dolby Digital readyLAN· Supports dual LAN jacks- 1st LAN supports 10/100/1000 Fast Ethernet by nForce4 SLI- 2nd PCI Express LAN supports 10/100/1000 Fast Ethernet by Marvell 88E8053WLAN & Bluetooth· 802.11g WLAN Bluetooth dual net PCI CardNOTE: This card & antenna are only available in some specific area. IEEE1394· VIA 6306 chipset- Supports up to three 1394 ports. (Rear panel x1, front x2)- Transfer rate is up to 400MbpsOn-Board PeripheralsOn-Board Peripherals include:- 1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes- 1 serial port- 1 parallel port supports SPP/EPP/ECP mode- 1 Audio jack(5-in-1), coaxial/fiber SPDIF out- 1 IrDA pinheader- 1 D-Bracket2 pinheader- 10 USB 2.0 ports (Rear x 4 / Front x 6)- 2 RJ45 LAN jacks- 3 IEEE 1394 connectors (Rear x 1/ Front x 2)MSI Reminds You...· The floppy disk cable will be optional.BIOS· The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and expansion cards of the board automatically.· The mainboard provides a Desktop Management Interface(DMI) function which records your mainboard specifications.Dimension· 30.4cm(L) x 24.4cm(W) ATX Form FactorMounting· 9 mounting holes.
Operating system:Windows 9X/ME/NT/2K/XP/2003/Vista/XP X64/2008
Related drivers:View related drivers
Msi K8N Diamond driver 1.2 details 
Before you Download
